Check status

See also: Direct Entry Overview, Direct Entry Workflow, and ADR Letters Overview

The Direct Entry (DE) Check Status feature sends a group of claims to the payer system and checks the payer's processing status of each claim in the group in real time. As each claim is checked, the results are returned and attached to the claim. If the status check returns payment data, the data is matched to the claim and stored. Secondary claims can be generated from these data.

Workflow

Check Status should lag behind Send Claims just enough to give the payer time to adjudicate the claim (the next day for Direct Entry). Use a scheduled auto list that contains the DE Check Status auto module. (Use a saved filter that includes the Direct Entry claims that were released yesterday or two days ago.) To automatically create secondary bills for paid claims, add the Secondary Bill Claims auto module that uses the same filter as Check Status.

What check status does

For Medicare Part A claims, Check Status queries the payer system. The current status and the primary reason code are returned, and an ADR letter (report), if present, is returned and attached to the claim. With Enhanced DE Check Status, the Check Status query returns additional data from the Medicare system to guide claim correction and adjustment without requiring users to access DDE.

In addition to saving the status information, Check Status uses a set of status history codes to attach a permanent record to the claim:

Code Description Notes
845 DE Check Status - selected The claim is in a group that will be sent to the FISS.
846 DE Check Status - removed The claim does not meet requirements for the job, and it was removed from the group.
Claims must be released UB Part A Medicare claims.
847 DE Check Status - not checked There is nothing wrong with the claim, but something happened to the job (e.g., job canceled). Check the claim status again.
848 DE Check Status - check failed The check status job has failed (e.g., screen timed out). Check the claim status again or contact Support if the issue persists.
849 DE Suppression Check Status - not checked The claim is suppressed.
990 DE Check Status - success, claim is Denied
DE Check Status - success, claim is Rejected
Denied and Rejected
991 DE Check Status - success, claim is Suspended
DE Check Status - success, claim is Returned to Provider
Suspense and RTP
992 Exception claim Could not locate claim
995 DE Check Status - success, Paid Claim is/will be paid.

 

Enhanced DE Check Status

For MDE customers using Assurance 8.5.3 or higher, Enhanced DE Check Status functionality provides more visibility into the status of claims in the Medicare system without users needing to log in to DDE.

Items Fundamental facts
Availability Customers on Assurance 8.5.3 or higher that are using the MDE feature.
Group right Direct Entry: Check Status

Enhanced DE Check Status allows users to see all reason codes associated with the claim, including the FI-specific reason descriptions, and provides the option to check the service line status for a single claim or for a group of claims.

DE Payer Activity tab

After a claim is successfully run through the DE Check Status process, the FISS Claim Inquiry results appear on the Payer Activity tab. With the exception of service line information, the information in the following sections will be updated each time the DE Check Status runs.

At the top of the Payer Activity tab, the Source column for each line item appears. For the DE Check Status, the source is DE. The DE line item also contains the following information for the status check:

  • Import Date reflects the first date that check status returned a status
  • Effective Date is the last/most recent date that check status returned a status
  • Code Set shows the last/most recent status returned (S, T, R, D, P)
  • Amount reflects the total charges on claim

FISS claim inquiry results

The FISS Claim Inquiry Results page shows an abundance of information regarding the results of the DE check status. Grouped into sections for ease of use, the information is shown as of the last check status:

  • Current Status shows the Status, Location, and Reason.
  • Claim Information displays FISS data. The field labels highlighted in yellow correspond to the FISS field labels and are refreshed each time check status is run. The non-highlighted field labels are pre-populated from the claim in Assurance.
  • The Reason Codes section displays all reason codes associated with the claim in FISS. Medicare can apply up to ten (10) reason codes. A ‘+’ button at the end of each row allows the user to open a pop-up window to view the full description.
  • The Remarks section contains the remarks added to claim in FISS. A ‘+’ button at the end of the row allows the user to open a pop-up window to view the full remark.
  • Paid Detail shows FISS payment-related information. An outlier amount could be available and populated prior to the claim being paid to assist with addressing pended claims.
  • Line Item Detail displays available FISS service line data only after the service line status is checked.
  • Inquiry History is populated with historical check status results to provide visibility into the life cycle of the claim in the FISS system. The Operator column identifies the Direct Entry Account user ID used by the check status job.
  • The User Notes section is contains user notes added to the claim history to provide better visibility into actions related to researching and resolving pended claims.

DE service line status

The Line Item Detail section is only updated when the DE Service Line Status is run. The service line status request can be run for a single claim (from Claim) or for a group of claims (Batch). DE Service Line Status is only available for claims in an unpaid status.

As described below, the DE Service Line Status may be done manually from the claim, manually from the Check Status + Service Lines option off the Claims menu, or automatically using an auto module.

DE service line status - from claim (CFI)

The DE Service Line Status button has been added to the claim toolbar.

All of the following requirements must be met for the DE Service Line Status button to be enabled*:

  • the site is enabled for Enhanced DE Check Status
  • the user has group right Direct Entry: Check Status
  • the claim is a Medicare UB claim
  • the claim is in a non-paid status
  • the claim has successfully run through DE Check Status after the feature enabled

* If all of these criteria aren't met, the DE Check Service Line Status button will be gray.

After the DE check status has completed, click the DE Service Line Status button progresses from green to yellow to red. Here's what the colors mean:

  Button color Description
Green Claim is eligible for service line status.
Yellow Service line status request in progress.
Red Service line status request has failed.
Gray Not available or not enabled.

DE service line status - batch: Using the Claims menu

Claims > Direct Entry > Check Status + Service Lines

In the Check Status + Service Lines filter,

  • the date defaults to Assoc. Status: Date Effective with the date range defaulted to the current day. The date type and range can be modified.
  • the Reason Code is required. Multiple reason codes can be entered using the standard filter syntax (e.g., T30010, T35555).
  • the Direct Entry status defaults to Pended to limit to claims currently in an RTP and Suspense status.
  • additional filter criteria can be entered (e.g., NPI, type of bill).

DE service line status - batch: Using an auto module

When running the DE Service Line Status as an auto module, a saved Check Status + Service Lines filter is required. The timing of the Check Status + Service Lines auto module is important. The Check Status + Service Lines auto module should be timed to run after the DE Check Status has run. Additionally, if your site is planning to add this auto module to an auto list, it is recommended that it not be scheduled to run during a time that other Direct Entry jobs are scheduled to run.

Reminder

The Line Item Detail only updates when a service line status request is submitted. The DE Check Status job does not update the Line Item Detail section.

Maximum service lines

The service line check status is limited to the first 75 service lines. If DE Service Line Status icon is clicked in CFIClosed Claim Form Interface (CFI) is the claim display in Assurance. CFI represents the selected claim so that users can review, change, validate, or delete it. CFI contains multiple tabs (pages). for a claim with more than 75 service lines, a message box appears. Selecting Yes allows the user to continue and the status will be returned for only the first 75 service lines. Selecting No cancels the request.

If the DE Check Status + Service Lines request is run for a group of claims and any claim in the group contains more than 75 service lines, the process will only query and return status for the first 75 service lines. The message box will not appear for groups of claims or claims run in an auto module.

Job queue and home page messaging

DE Check Status + Service Lines requests that have been submitted in batches and auto modules will appear on the Job Queue page and in the Messages section of the home page. A Completed status only indicates that the request was successfully submitted. It does not mean that the Check Status job has been completed.

Reporting

An ADR Management report lists claims with an ADR and the associated ADR Reasons, Original ADR Date, ADR Receipt Date, and ADR Due Date. Filter for reason codes S39700 and S39701 to find claims with ADRs. The report can be run manually or set up to run in an auto module.

 

Notes (Enhanced DE check status - DE service line status)
  • Checking status at the service line level should be limited to claims in an RTP (T) status.
  • Service line check status is limited to the first 75 service lines.
  • When a request is sent for a single claim or a batch of claims, the DE Service Line Status button in the claim toolbar will indicate the progress of the request.
  • Check the DE Service Line Status button color before creating a correction claim.
    •  If button is yellow or red, the claim may not reflect the most current status.
  • If the request fails due to scenarios such as FISS unavailability, credential issues, or screen timeouts, the request will be automatically retried several times before it is set to fail. The button will remain yellow until the request process completes.
    • If DE-related jobs are queued or running, wait for them to complete and then check to see if the service line check completes.
    • If no DE-related jobs are running, contact Support.
  • Failed requests will set the DE Service Line Status button to red and local status code 846, 848, or 849 will be posted to the claim history.
    • If the local status code is 846 or 849, do not resubmit the request.
    • If the local status code is 848, resubmit the request. If the request continues to fail, call Support.
  • If the DE Service Line Status button is gray, checking status at the service line level is unavailable for this claim or the Enhanced DE Check Status has not been enabled. Check to see whether all the requirements listed above have been met.