Work attachments from the claim display

Toolbar button: Additional button (), Create Attachment menu option

With Attach Assist, you can create an attachment and add supporting documents based on your group rights and whether the payer accepts electronic attachments from Optum. A claim can have multiple attachments, and each attachment can have multiple supporting documents. Review the Attach Assist Overview for basic information about attachments, documents, and the typical life cycle.

Create an attachment

Find the claim you need. Routing is based on the payer CPID on the claim. Users must ensure attachments are created for the correct payer. The payer name and CPID display at the top of the Attach Assist page upon clicking Create.

Use these steps to create an attachment:

  1. Click the Additional button, and select Create Attachment.
    1. For a solicited attachment, the system displays the Attach Assist page.
    2. For an unsolicited attachment, the system displays a confirmation request:
      "UnreleasedClosed Unreleased reflects an accepted or warned claim that has not been sent to the clearinghouse. (Rejected claims cannot be released.) claims cannot be released until attachments are either completed or deleted. Do you want to continue to create an attachment?"
      1. If the user clicks Yes, the system saves any claims changes and then displays the Attach Assist page.
      2. If the user clicks No, the system returns the user to the displayed claim without creating an attachment.
  2. Check the Claim Information table to confirm the claim payer. Attachments are routed based on the payer CPID.
  3. Complete the Create New Attachment fields as needed. The system pre-populates attachment fields with claim data when possible.
  4. Click Create. The system adds and highlights the empty attachment in the Claim Attachment table. The Add Document section opens, ready to add items to the attachment.

If you are already viewing the Attach Assist page for the claim, you can click Add Attachment from the Claim Attachment table to create a new attachment, and then follow steps 2-4.

Notes
  • Upon creation, unreleased claims with unsolicited attachments have a claim error named Attach on the RELTRANS field. This error remains on the claim until the attachment is sent and Optum returns the PWK ID required for submission of the claim to the payer.
  • If electronic attachments are unsupported for the payer through the Attach Assist feature, you will see the message "Attach Assist not supported" after clicking the Additional button.
  • Although claim data is copied at the time the attachment is created, please note that subsequent updates to claim data are not automatically posted to attachments, and changing attachment data does not post the update back to the related claim fields.

Attachment field notes

  • The Attachment Name and Note fields are for your use and reference. The system does not send this information to the payer. The Note field is limited to 4,000 characters.
  • The system adds the payer CPID to the start of the attachment name when it is created. The user cannot modify the CPID value. Even if this value is deleted or changed for a created attachment, the system will reinstate the CPID value when the attachment is saved.
  • Solicited non-Medicare attachments require the payer reference number (ICN/DCN).
  • Solicited and unsolicited non-Medicare attachments require all displayed fields except attachment name and note.
  • For solicited Medicare attachments:
    • The case number and payer reference number (ICN/DCN) are required. The case number cannot exceed 25 characters, and it may end in PR, PO, or MA for Medicare purposes. The payer reference number must be 13 characters, 15 characters, or between 17-23 characters. Only spaces and dashes are allowed in addition to letters and numbers if the length is between 17-23 characters. The 13-character or 15-character payer reference number is limited to numbers.
    • The system selects a default administrative contractor based on the active payer and CPID on the claim. You can select a different administrative contractor, if needed.
Warning

If the claim payer changes before the attachment is sent, then users have a visual cue through the CPID in the Attachment Name to delete any outdated attachments and start new attachments. If the claim payer changes after the attachment is sent, then users should follow department procedures related to PHI violations as applicable.

 

Caution

A claim can only support ten attachments. If the claim already has ten attachments, the system displays a message asking the user to delete an existing attachment.

There are two methods available to delete an existing attachment:

  1. Use the instructions within this help topic to delete an unsent attachment created through the Attach Assist feature. See the Delete Attachments or Documents heading.
  2. Return to the claim form, and delete an entry from the Attachment Identification table on the Additional tab. Do not delete the entry for any sent attachment created through the Attach Assist feature. The system must maintain a record of any sent attachments since data is sent to the payer. Assurance posts information to this table for sent attachments created through Attach Assist.

Add documents

Follow these steps to add supporting files to a selected attachment:

  1. Click Add Document for the selected Attachment, if needed, to open the Add Document fields.
  2. Click Browse next to the Document field to open the Choose File to Upload window. This window defaults the file list to the payer's accepted file formats.
  3. Select the file on your local system or network. The window populates the File name.
  4. Click Open to confirm the file selection and return to Create Document. The system enters the file name in the Document Name field. You can change the displayed document name.
  5. Add a Note, if needed.
  6. Click Save to upload the file. The system adds the file name and other information in the Documents in [Attachment Name] section.
  7. Repeat steps #1-6 for each file you need to send in the attachment.
Tips
  • To reduce errors, the feature design promotes one type of action at a time. For example, if the attachment fields are active, then the feature inactivates the ability to add a document. If the task you want to do is not available, check for a different open action you may need to cancel.
  • You can copy claim information from the header and paste it in a field. For example, you can copy the DCN/ICN in the page heading, and then paste it in the Payer Reference Number field.
  • You can sort attachment and document lists by any column heading such as Status.

Edit attachments and documents

Once you send an attachment to the payer, you can no longer edit or delete the attachment or its documents. If the attachment still has a status of Created, then you can follow these steps to edit the content:

  1. Click the Attachment Name or Document Name you want to modify. The system opens the Edit Attachment or Edit Document fields.
  2. You can change any information in an active field.
  3. Click Save.

Submit attachments

Follow these steps to electronically send a completed attachment to the payer.

  1. Select the attachment from the Claim Attachment list.
  2. Click Send. The system displays a request for confirmation.
  3. Click OK to send the attachment to the payer and change the attachment status. Or, click Cancel to return to the Attach Assist page and leave the attachment with a Created status.

The system displays error messages after you confirm the Send action, if the attachment does not meet minimum requirements such as containing at least one document.

Delete attachments

You can only delete attachments that have not been sent to the payer. Once an attachment is sent, the system keeps a record of its existence.

Follow these steps to delete an attachment and all of its documents:

  1. Select the attachment from the Claim Attachment list.
  2. Click Delete Attachment. You may need to click Cancel in the View Attachment section to activate the Delete Attachment button.
  3. The system displays a request for confirmation. Click OK to remove the attachment and all its documents, or click Cancel to return to the Attach Assist page.
Caution

If you are deleting all unsent attachments on an unreleased claim through Attach Assist, be sure to return to the claim and validate it. This action clears the Attach error that holds the claim while waiting for an assigned PWK ID.

Delete documents

Follow these steps to delete a document from an attachment:

  1. Select the attachment from the Claim Attachment list.
  2. Select the document from the Documents in [Attachment Name] list.
  3. Click Delete Document.The system displays a request for confirmation.
  4. Click OK to remove the document, or click Cancel to return to the Attach Assist page.

Viewing attachments and documents

If you are already on the Attach Assist page, then select an attachment from the Claim Attachment section to view details. Click the icon in the Document column of the Documents in [Attachment Name] section to save or open the file.

Use these steps to view attachments and documents if you are starting from the claim instead of the Attach Assist page:

  1. Click the Payer Activity tab, and select a table entry with Attach as the Source. This action activates the View button within the row, if you have the appropriate group right.
  2. Click View. The system displays the Attach Assist page. The selected item is highlighted in the Claim Attachment table with a list of file contents in the Documents in [Attachment Name] table. Click the attachment name to review attachment details.
  3. Click the icon in the Document column to open or save the file for review. Close this window when you are done.

Find claims with attachments

Use the Last Attachment field group in the Advanced Claim filter to find claims with attachments in a specific state such as Created or Error. You can also use local status code entries or payer code entries related to claims with attachments.