Using submitted reason codes
If your site uses local reason codes, you will be required to select a reason code from a list of codes as you do the following claim operations:
- Delete claims
- Rebill claims
- Duplicate claims
Each time you select one of these operations, a list of the appropriate reason codes will be displayed. You cannot continue until you have selected a reason code.
If you are using a batch option on a group of claims (from a menu option or an auto-module) the reason code you select will be applied to all claims in the selected group. If you need to apply different codes to different claims, you must choose a reason code and then select just the claims that should be marked with the code you have chosen.
Submitted reason codes also contain a large number of hold codes that can be used to hold claims. These reason codes are loaded into hold code maintenance where they can be used to hold claims. However, do not make changes in hold code maintenance since the submission of each new reason code file will erase all your changes.
To use a hold code:
- Open the claim.
- Click into the HOLD CODE field at the top of the claim
- Press F9. The list of hold codes opens.
- Double click the hold code you want to use. The hold code is added to the claim.