Set up claim options, CCI tab
Menu location: Maintenance menu, System Administration, Claim Options, CCI tab
See also: Set up suppression, CCI edit overview, and Edit severity setup
Medicare Correct Coding Initiative (CCI) Edit is a collection of checks set up to run against Medicare's CCI compliance rules. It is designed to mark pairs of procedure codes that Medicare will not allow on the same claim. Locating and correcting these coding violations before the claim is sent to Medicare is your first defense in avoiding possible fraud and abuse issues defined by Medicare.
This product uses the Medicare CCI rules or the Medicaid NCCI rules to edit claims for compliance:
- Medicare CCI rules are enabled by default. The default automatically checks all Medicare claims unless it is suppressed (disabled). In addition, you can configure Medicare CCI Edits to check claims going to other LOBs and Payers.
- Medicaid NCCI rules are disabled by default. When enabled, they are used to check claims going to Medicaid payers.
Non-Medicaid claims cannot be cvonfigured to use the Medicaid NCCI rules. Non-Medicaid claims that are configured for CCI Edits will always use the Medicare CCI rules.
The global suppression of CCI edits (on the Main tab) suppresses all CCI edits on all claims - Medicare, Medicaid, and other. Use the features in this Claim Options tab to specify other LOBs and payers to check or to suppress the edits based on data on the claims.
How CCI suppression works
When CCI Edits run, the system first checks to see if global suppression is in place (completely disabled from the Main tab). If completely disabled, the system does not run CCI edits on the claim or apply any CCI errors. Second, the system checks to see if the General configuration within the CCI tab suppresses CCI edits based on bill type, custom modifier, or code set. Third, it checks to see if CCI Edits are suppressed for the facility or physician on the claim. When all restrictions have been assembled, the system checks the claims that have not been eliminated against the appropriate set of CCI rules - Medicare or Medicaid.
General CCI configuration
Items entered under this configuration apply to all payers that are enabled for CCI Edits. There are two sets of suppression fields:
- Use Non-Medicaid Exceptions to set up suppression settings for the Medicare CCI rules.
- Use the Medicaid Exceptions to set up suppression settings for Medicaid NCCI rules.
Bill type exceptions
Enter bill types whose presence should suppress CCI edits. If a claim contains a bill type on the exception list, CCI Edits checking stops with no related error placed on the claim. Separate multiple bill types with commas. For example, enter 115, 117 to suppress CCI checks on claims that have a bill type of 115 or 117.
Custom modifier exceptions
Enter modifiers whose presence should suppress CCI errors. For example, when a component procedure code is paired with a modifier from the standard Medicare list, the system places a CCI Warning on the procedure code instead of a CCI Error. If you do not want to see the CCI Warnings on codes that have certain standard modifiers attached, then enter the modifier(s) in the Custom Modifier field. Separate multiple modifiers with commas.
Financial class exceptions
Enter financial classes whose presence should suppress CCI errors. If a claim contains a Financial Class in the list, then the system stops CCI Edit checking on the claim. Separate multiple entries with commas.
Code set suppression
Use this section if you need the system to skip CCI edits for all named procedure codes when they are on service lines that contain named revenue codes. The section begins with a list of the revenue/procedure code sets that have already been established. Use the three fields below the list to make additions or changes.
- To change an existing code set, select the entry. Change the codes and LOB type, and click Update to hold your change. Click OK to save your work.
- To remove an existing code set, select the entry. Click Remove. Click OK to save your work.
- To add a new code set, type the combination of Revenue Code(s) and Procedure Code(s) that should trigger the suppression of CCI edits on the service line. You can enter multiple codes or ranges of codes. Select an LOB Type. Click Add to hold your work, and click OK to save it.
The LOB Type box specifies the set of CCI rules to which the code suppression applies:
- Select All to apply the suppression to both sets of CCI Rules.
- Select Medicaid to apply the suppression only to claims that use the Medicaid NCCI rules (Medicaid claims).
- Select Non-Medicaid to apply the suppression only to the claims that use Medicare CCI rules (Medicare and all non-Medicaid LOBs and payers).
Payer selection
Use these configuration settings to add CCI edits to claims for another LOB or payer. These settings are not suppression settings. Use CCI Edit Custom Settings to turn on Medicaid NCCI edits for Medicaid payers or a Medicaid LOB. You can also set up rules to have the system apply Medicare CCI edits to non-Medicaid payers and LOBs. You can select CCI edits by CPT Group or run all CCI edits.
This display begins with the list of non-Medicare payers for which you have set up any CCI Edits. The list shows the LOB, payer or payer alias, and the CPT Groups that will be evaluated. An empty payer column means that the setting has been created for the LOB - all payers that handle the LOB are included in the setting.
Follow these steps to set up CCI Edits for another LOB or payer:
- Click Professional or Institutional in Form Type. This action populates the LOB or Payer fields and FI Data Content Selection list.
- Click the LOB, Payer, or Alias radio button. Then click on the entry you need.
- Click on the CPT Group(s) you need to select the CCI edits to use for the payer or LOB claims. Select All CPT Groups to apply all CCI edits.
- Click Add. Repeat steps 1-4 add other payers/LOBs.
- Click OK to save the settings.
- Dimmed rows are suppressed by another CCI setting. They will not be applied to claims. Look for the suppression settings on the Main tab of Claim Options, in the Facility Master, and in the Physician Master.
- If you create a custom setting for an LOB, all payers that pay for that LOB are removed from the Payers list. If you want all claims associated with an LOB to be edited against the same setting, save time and select the LOB. If you want the custom setting to be associated with only some payers, you will need to create the setting for each payer instead of the LOB.
- If you create a CCI Edit for a payer, all LOBs that use the payer are removed from the LOB list. Therefore, if one payer handles multiple LOBs at your site, set up the CCI Edit by LOB, not payer.
Filtering for CCI edits
The user-selectable field list in Claim Filter allows you to locate claims to which a CCI status has been added, whether it was added by a Medicare CCI rule or a Medicaid NCCI rule:
- To find claims that contain CCI warnings, select Edit Error and type CCIWARN.
- To find claims that contain CCI errors, select Edit Error and type CCIERROR.
- To find claims that contain a suppressed CCI error, select Status: Local Code and type 736 in the text box.
- To find claims that either CCI Warnings or Errors, select Status: Local Code and type 734.
- To find claims on which a user has overridden a CCI error, select Status: Local Code and type 739.
- To find claims on which the CCIWarn or CCIError was added by Medicaid NCCI rules, select the Medicaid LOB.
- To find claims on which the CCIWarn or CCIError was added by Medicare CCI rules, select all LOBs except Medicaid.
- You cannot modify the CCI rules themselves. They always remain the current Medicare CCI and Medicaid NCCI rules.
- To create a printed copy of your CCI Edit settings, run the Claim Options Maintenance Setup report.
- You can override any CCI error if needed.
- To allow a CCI Warning or to suppress the warning entirely, the modifier must be with the component procedure code of the pair. If the modifier is with the comprehensive procedure code, CCI Edit will add an error to the component procedure code.
- Not all code pairs allow a modifier to reduce the severity of the error. Only those codes that can be reduced are impacted.