Set up claim options, Duplicate Claims tab

Menu location: Maintenance menu, System Administration, Claim Options, Duplicate Claims tab

Use the Duplicate Claims tab to define how the system should identify duplicate claims. Specifically, the data you select on this tab must match on both claims. The system check for duplicates is always institutional claims against other institutional claims or professional claims against professional claims. Duplicate claim checker is turned off by default. Unless you set criteria on the Duplicate Claims tab, your claims are not checked for duplicates.

To activate the Duplicate Claims tab, use Group Master to assign the rights Edit Custom Edits Configuration and View Custom Edits Configuration to a group. All users in the group will be able to view and change the configuration of Duplicate Claims and Related Claims.

When Duplicate ClaimClosed Duplicating a claim creates an exact copy of a claim open in CFI. Checker runs during claim submission, it places a DUPCLAIM error on the inbound payer claim when it identifies a duplicate. The duplicate claim error must be overridden before the claim can be released to its payer.

Set duplicate claim criteria

To configure the duplicate claim checker, first select the Enable UB or Enable 1500 form type. You can enable one or both form types and set up different criteria for checking. Using multiple criteria fields reduces false positives. To disable duplicate claim checking, clear the form type checkbox.

Field Description of use
Medical Record Number Either Patient Control Number or Medical Record Number must be checked. In some cases, Patient Control Numbers are modified by an HIS-generated sequence. This could result in inaccurate number of duplicates being found. Medical Record Numbers never vary, so this may be a better option for your site, if the information is on the claim.
Patient Control Number Either Patient Control Number or Medical Record Number must be checked. We recommend that you use Patient Control Number whenever possible.
Patient Last Name The name of the patient on the claim.
Payer The name of the active payer on the claim.
Payer Indicator A=Primary, B=Secondary, C=Tertiary
Bill Type This is the institutional claim's three-digit type of bill.
Total Dollar Amount The total of the service line charges on the claim.
Principal Diagnosis Code FL 67 on the UB, the first code in FL 21 on the 1500.
Principal Procedure Code FL 74 on the UB, CPT/HCPCS of the first service line on a 1500.
Facility Sub ID ID of a specific facility - The Facility Master shows sub IDs for all of your facilities.
Frequency When the Frequency checkbox is selected and the Resubmission field (box 22) on any 1500 claim contains a value of 7 (corrected) or 8 (canceled), that claim will be excluded from the duplicate claim check. When frequency is used, at least one other duplicate check criterion is required. Frequency is unchecked by default.

If the service dates on either claim being compared are empty, the duplicate claim checker does not run.

When using medical record number or patient control number, if the field is empty on the inbound claim, the Duplicate Claim Checker does not run. When both fields are used, if either field is empty on the inbound or open claim, the Duplicate Claim Checker does not run. For all other criteria, if the field is empty on one of the claims and all other criteria match, the Duplicate Claim Checker will still run.

Caution

Using both medical record number and patient control number as data to use in determining a match slows the duplicate check process.

Working with claims marked as duplicates

During claim submission, the inbound payer claim is checked against existing non-outsourced released and unreleased claims that are no more than 90 days old. When a data match is found, the system places a DUPCLAIM error on the Release Status field at the top of the inbound claim. The error message states "This claim meets your criteria for a duplicate claim".

To find duplicate claims, use the Edit Error user-selectable field in the claim filter, and enter DUPCLAIM. This will generate a working group of claims that were marked as duplicates of existing claims during claim submission. Each claim on this list is a data match with another claim in the database. You can also locate claims by selecting Error Type in the user-selectable field and entering 111 to find claims with active duplicate claim errors, or enter 112 to find claims with overridden duplicate claim errors.

If you determine the duplicate claim should be released and sent to the payer, you must override the DUPCLAIM error in the Release Status field of the claim. If you click Override, the error turns blue, and the system applies local status code 742 (Override of Custom Edit Errors) to the claim history. The claim can be sent to the payer as soon as it worked to acceptance. If your original open claim contains a DUPCLAIM error, use Claim Review to open an alternate list of claims that match the open claim. Review the claims on the alternate list of duplicates. When you return to the original claim, delete it if it is a duplicate.

If a user chooses to View Duplicate Claims from an open claim, then the Duplicate Claim Checker looks for matching claims but does not apply a DUPCLAIM error.

Notes