Set up secondary billing

Menu location: Maintenance menu, System Administration, Secondary Billing

Complete payer set up for importing remits and creating secondary claims from the payment information requires that you set up both secondary billing and remit import options. Remit Import deals with the payers that are the source of the remit data. Secondary Billing deals with the payers that will be receiving the secondary or tertiary claims. You should set up secondary billing criteria for any payer to whom you will be sending these claims. After you have set up a rule for a payer, the system creates a secondary or tertiary claim to that payer if all the criteria are met.

A payer that you have not set up in secondary billing is an unknown payer. Claims created for unknown payers use the Options for Unknown Payers. To save processing time, if you will be regularly sending secondary claims to a payer, add the payer to your Known Payers list.

As you read these instructions, keep in mind that secondary includes any claim sent to another payer after its parent has been paid - secondary or tertiary.

Caution: If your site bypasses facility master, all payers are unknown payers until you add them to known payers.

Set the global rules

Global rules apply to remits. Only after the global rules have been applied will the rules for unknown payers and known payers be applied. Of the global rule options, only Check For Secondary Payer is defaulted to enabled. If you want to use other global options, you must set them.

Global options Description
Check for Secondary Payer When checked, the paid claim must contain a 'next' payer.
Hold Unknown Payers for Review Add the Hold Code of your choice to secondary claims. The hold code ensures that your secondary claims for all unknown payers are not released until you have had a chance to review them. Select the hold code you want to use. The hold code list is taken from the hold codes established in Hold Code Maintenance. If you select a hold code, then the system disables the Accept Locally Printed Claims checkbox in Options for Unknown Payers as paper claims are also held.
Swap Display of Insured/Other Insured (1500) When this box is checked the payer information for the two payers on the paid claim is swapped on the secondary claim so that the active payer information displays in FL 11 and the paid payer displays in FL 9. This swap changes the display only. It does not change the location of the information on the printed forms.
Hold Alternate Match for Review Select this checkbox to hold a secondary claim when the remit payment used to create it was matched using an alternate method (See Remit Import options). The system applies the user-selected hold code to the secondary claim in question, and then a user must review it and delete the hold code to release the claim to the payer.

Set options for unknown payers

Unknown Payers are all payers that send you remits and are not in your list of known payers. By default, all checkboxes in this panel are selected, and no adjudication information is posted from the remit to the secondary claims. Keep in mind that if you make changes to the options in the Unknown section, the changes apply to all unknown payers.

Unknown payer options Description
Check for Previous Bill When enabled, the system does not create a secondary claim if a secondary claim already exists.
Accept Locally Printed Claims Mark all locally printed secondary claims going to unknown payers as accepted. These claims are ready to print and mail. During release, these claims are marked released, and sent to the clearinghouse, but they are NOT sent to payers. This option also marks Hard Copy Direct claims as accepted unless there is an error on the payer address required for mailing. (Claims on which Hold Codes are placed during creation will not be marked released until the Hold Code is removed.)
Post Value Code for Coinsurance Put code and coinsurance amount from the payment of the parent claim in Value Code and Amount on the secondary claim. (UB paper claims only)
Post Value Code for Deductible Put code and deductible amount from the payment of the parent claim in Value Code and Amount on the secondary claim. (UB paper claims only)
Post Value Code for Patient Liability Put code and patient liability amount from the payment of the parent claim in Value Code and Amount on the secondary claim. (UB paper claims only)
Post Adjudication information Specifies if you want adjudication information from the remit added to the secondary claim as it is created.
  • None (default): Does not post any adjudication information to the secondary claim.
  • Detailed: Posts adjudication information to each service line separately.
    If there is not a one-to-one match between service lines and service-level adjudication information, the service-level adjustments will be totaled and rolled up to the claim level. The order of the service line does not need to match the order of the service-level adjudication lines. To determine a one-to-one match, the system uses the amount, revenue code, and HCPCS. Alternatively, it uses the line control number alone. The system uses dates and modifiers to resolve discrepancies, but these items do not need to match.
  • Claim rollup: Posts all service line adjudication information at the claim level (Additional tab in CFIClosed Claim Form Interface (CFI) is the claim display in Assurance. CFI represents the selected claim so that users can review, change, validate, or delete it. CFI contains multiple tabs (pages).). Posts all adjudication data of the paid claim in the appropriate fields on the secondary claim, bypassing service line detail. Use this option for payers that cannot process service line detail to allow for electronic acceptance of secondary claims.
Post Document Control Number On secondary claims created from primary Medicare claims, place the DCN from the Medicare remit in the Medicare DCN field on the secondary claim. (UB FL 64, 1500, payer section on the Electronic tab)
HCD Claim + EOB Type
Note: This option does not display until after you have contracted to use Hard Copy Direct. The option is used to select the type of EOB to print with your secondary claims.
  • None (default): Disables HCD for the selected payer. No claim or EOB will be sent for printing
  • Summary: Sends a secondary claim plus a summary of the remit.
  • Detail: Sends a secondary claim plus details of the remit.
  • MNRA: Sends a secondary claim plus CMS-MNRA.

Set rules for known payers

Known payers are noncommercial payers from your facility master or unknown commercial payers that you have selected and converted to known payers. To add an unknown commercial payer, click the Manage tab. Use the Name drop-down list to select a payer, and then click Add. All known payer names are followed by a claim form designation: Prof for professional claims or Inst for institutional claims. If needed, you can set different rules for a payer's inpatient institutional claims, outpatient institutional claims, and professional claims.

Follow these steps to set rules for a listed known payer:

  1. Select the payer name.
  2. Choose the Secondary Billing rules to apply within the Options for Known Payers panel.
  3. Click Update.
  4. Click OK.

The available rules used by known payers are the same rules used by unknown payers with two additional options: Type of Bill and Medi-Cal Split ClaimClosed Split Claim by Service Line Date creates a new claim and uses the criteria you select to divide the service lines from the original claim between it and the new claim. Lines.

Type of bill

Use the Type of Bill drop-down field to create separate sets of rules for inpatient and outpatient institutional claims:

  1. Select the payer name with the Inst claim form label.
  2. Choose Inpatient or Outpatient from Type of Bill.
  3. Choose the Secondary Billing rules to apply.
  4. Click Update.
  5. Click OK.

The payer name will show (Inst) (I) or (Inst) (O) at the end of the label to indicate the rule set.

Medi-Cal split claim lines

Enable the Medi-Cal Split Claim Lines checkbox if you want to send all secondary claims to the selected known payer based on the Medi-Cal payer requirements. By default, the system will set Post Adjudication Information to Detailed and split the secondary claims so they meet the Medi-Cal requirement of 14 service lines. The system follows the Check for Previous Bill rule whether the Medi-Cal Split Claim Lines checkbox is checked or unchecked.

Remove zero-pay services

A checkbox labeled Remove Zero-Pay Services has been added to the Secondary Billing Maintenance page. The Medi-Cal Split Claim Lines checkbox must be selected before the Remove Zero-Pay Services checkbox can be selected.

Selecting the Remove-Zero Pay Services checkbox means that the service lines with $0 payment will not be included in the claims resulting from the split.

When this is configured, Assurance will automatically:

  • remove zero-pay service lines from the claims before the split
  • update the remarks elements of the new claims to reflect the counts/amounts after the split

The Remove Zero-Pay Services functionality may be initiated through the automated secondary creation (ASC) process or by clicking the Secondary button in the CFI toolbar.

Notes
  • If a listed payer has been removed from the master list of electronic payers (ECARMAST), the payer name is followed by an asterisk. These payers are no longer valid electronic payers. Secondary claims going to these payers will drop to paper.
  • When the secondary claims are created, they are placed in the claims database as unreleased claims. Any errors on them are marked and must be corrected before they can be sent to their payers.
  • Secondary claims going to an unknown payer that are not locally printed claims are created as unreleased, rejected claims.
  • If a payer is not on either the Selected tab or the Non Commercial Payers list, it is an unknown payer because the payer is not in your facility master or it is a commercial payer without a set of rules.
  • To remove rules for known commercial payers, open the Manage tab and select the payer. Click the Remove button and then click OK. The payer is now an unknown payer.
  • Noncommercial payers can never be unknown payers. Therefore, you can change their rules, but not remove them entirely.
  • If you want to review accepted secondary claims before releasing them, you must add a hold code to them. To create a hold code to use with secondary billing, go to Hold Codes. After the hold code has been created, return to Secondary Billing Options, check Use Hold Code, and select the new hold code. The hold code will be added to all secondary claims.
  • Use Hold Code takes precedence over Accept Locally Printed Claims. If both options are checked, the secondary claim cannot be released until the Hold Code is removed.
  • To use claim filter to locate claims by hold code, click UnreleasedClosed Unreleased reflects an accepted or warned claim that has not been sent to the clearinghouse. (Rejected claims cannot be released.), select Hold Code from one of the drop down user-selectable fields, and enter the hold code.
  • The California button in the CFI toolbar does not initiate the Remove Zero-Pay Services functionality.