Medicare compliance overview

Medicare compliance and your claims

Edits for the major Medicare compliance issues are built-in to the system. Each edit flags claims for review so that compliance can be determined and corrected before the claim is sent to Medicare. Claim Validation uses your customizations to determine which compliance edits should be used and how the check for each should work. There is also a way for authorized users to manually override some compliance errors.

The following Medicare compliance checks are built into this product:

  • 72-hour Rule
  • CCI Edit
  • Medical Necessity Edit
  • Custom Edits

All edits except the 72-Hour Rule edit are based on sets of codes and policies issued by Medicare. The same process that gets the most current edit masters in the system also gets the Medicare edit changes, so your claims are always checked against the most current policies.

72-hour rule

Medicare requires Prospective Payment System providers to bill outpatient charges provided within 72 hours of a related hospitalization on the inpatient claim. This is the 72-hour rule. By default, the system checks Medicare outpatient institutional claims for services that may fall into the 72-hour period before and after a hospitalization. Both the inpatient and outpatient claims are marked. The 72-Hour check runs when a claim is submitted and each time the claim is validated. Optionally, the 72-Hour check can be set up to check 1500 claims from selected facilities.

The results of the check can be viewed either by filtering for claims that contain Local Status Codes 720-725 or by running the 72-Hour Rule report. If review indicates the claims are for related services and should be corrected, corrections can be made before the second claim is sent to Medicare. The error for the 72-hour rule is placed on Release Status at the top of the claim. It is automatically removed when the claim is revalidated - whether or not a change was made to the claim. However, even after the error has been removed, you can locate the claims with filter.

In 72-Hour Rule Maintenance, you can change the criteria for the 72-hour check. You can change how the check works for your Medicare claims, as well as set up a check for each major LOB.

Correct Coding Initiative (CCI) edits

The Centers for Medicare and Medicaid Services implemented correct coding initiatives for both Medicare and Medicaid claims with the common goal of promoting standard coding practices and preventing inappropriate payments. By default, the system will run Medicare National CCI edits on all your Medicare claims, and suppress the application of National CCI (NCCI) edits on your Medicaid claims.

Medicare checks outpatient claims for two types of scenarios that may indicate billing inaccuracies:

  • Billing two mutually exclusive procedures on the same claim, such as two different organ repair methods
  • Billing a component procedure separately from a more comprehensive procedure on the same claim, such as both a nerve block (component) and a simple wound repair (comprehensive)

When activated, Medicaid NCCI edits look for issues with code combinations:

  • HCPCS/CPT codes that should not be reported together
  • Medically Unlikely Edits (MUE) that define the ceiling for the reported number of units of service for a procedure beyond which it is likely to be incorrect, such as the removal of more than one appendix

CCI edits place an error or warning on procedure codes that may violate the rules. The claims can then be inspected before they are transmitted to the payer. Although you cannot change the CCI edit content, there are several ways your site can apply or suppress CCI edits based on your business needs.

Medical Necessity (MN) edits

Medicare checks claims against national and local medical review policies to determine if a service is a reasonable and appropriate treatment for the diagnosis. These edits check for three types of scenarios that may indicate the need for a code or medical record review:

  1. The procedure is not covered for the given diagnosis.
  2. The procedure requires more documentation to support its medical necessity for the given diagnosis.
  3. Coverage is limited for the procedure based on the given diagnosis.

By default, the system runs these MN edits on all your Medicare claims. If noncompliance is detected, an error is attached to the offending procedure code. The MN error text contains the official CMS link to the policy and provides a way for you to override the error if review shows the information should not be changed. The claim will not be sent to its payer until the coding issue has been corrected or the error overridden.

The MN edits use the policy's hierarchy when determining which error to place on a claim. The first type of order encountered stops the checking process and adds the error to the field:

  1. Limited Coverage - Check the policy to review the limitations.
  2. Documentation Required - Check the policy to determine what documentation is required.
  3. Not Covered - Not necessary under any circumstances.

Although you cannot change the MN edit content, there are several ways your site can apply or suppress MN edits based on your business needs.

Custom edits

Custom edits are edits that you can configure and decide to use or not. Custom edits function in addition to all the standard edits (payer, Medical Necessity, CCI, and 72-hour edits). The combination of improved, more accurate Medical Necessity edits and Custom edits will greatly reduce the number of outstanding coding issues on claims sent to Medicare.

Custom edits includes a process that checks to see whether a claim being submitted is a duplicate of one or more claims that already exist in the system. The process looks for non-MSOClosed Medicare Secondary Outsourcing (MSO) is an add-on option that sends claims that are secondary to Medicare to Assurance. released and unreleased claims that are no greater than 90 days old. When a duplicate is found, an error is added to the incoming claim. The error can be overridden in Claim Display.

Custom edits also includes predefined, supplemental edits that you can enable or disable. To remove an error placed on a field, change the data and revalidate the claim. You also have the option to override the error if you would like to leave the data unchanged.

Claims that contain errors added by duplicate claims or supplemental edits can be located with claim filter.